480g/m² rigid felt - Personalised printing

To get a quality print, please follow these recommendations:

- A finished file that does not require any retouching
- A full size file with a resolution of 300 DPI
- A file in either JPEG, TIFF or PDF format (in RGB mode and with converted or embedded fonts)
- A file with an ICC* colour profile
- The design must be free of copyright. It is forbidden to use, download and print, especially for commercial purposes, content subject to copyright, belonging to companies or brands, being intellectual property and works of the mind.

Our guides :

Make your own fabric easily with our design guides. And find all the information about our printed fabrics and textile printing technologies.

CREATE A PRINTED FABRIC

PRINTING GUIDE

MATERIAL GUIDE

FREQUENTLY ASKED QUESTIONS

Important information:

Depending on the material chosen, the colour may vary. For example, a green design printed on burlington fabric will be different from the same green design printed on canvas.
*If there is no ICC colour profile on an RGB file, we will apply the "sRGB IEC61966-2.1" colour profile by default. On a CMYK file, we will apply by default a generic colour profile "Coated FOGRA39 (ISO 12647-2:2004)". These are the most common RGB and CMYK colour profiles.
Some materials have a higher or lower shrinkage rate. Please consult our guides to find out. Depending on the material, we recommend that you always choose a slightly larger yardage than necessary.